The bilge pump suck water from the internal area of JetSurfTM. It is a vital part of the JetSurf operation.
During every ride, check whether the pump works properly. Keep the suction filter clean.
SUCTION FILTER CLEANING PROCEDURE:
Required tools: key No 10
1) Remove the rubber O-ring from the connector holder.
2) Disconnect the connector for the ICU charging (marked with a red cable tie). Remove the grounding
lead from the connector holder. Remove the second O-ring from the holder.
3) Unscrew two screws holding the pump platform.
4) Clean the suction filter.
5) Continue with the steps in the sequence 3 to 1.